zBOOST-ONE YX400-U FOR UMTS/HSPA DEVICES

zBOOST-ONE YX400-U FOR UMTS/HSPA DEVICES

The zBoost-ONE™ cell phone signal booster extends a Cell Zone™ for 1 - 4 phones/devices on the same mobile network. The zBoost-ONE supports UMTS/HSPA voice and data protocols at 2100MHz in homes or offices, increasing indoor signal coverage up to 1200 sq ft or 1-2 rooms. zBoost-ONE, the FIRST ONE PIECE cell phone signal booster, actually SYNCS to your carrier to reduce dropped calls and increase call clarity.

Benefits Include

• Increases indoor signal coverage – up to 1200 sq. ft. or 1 - 2 rooms
• No external antennas – ONE PIECE!
• Easy to set up – just put it where you get signal and plug it in
• Supports 1 to 4 users operating on the same mobile network
• Compatible with phones, smart-phones and data cards using UMTS/2100MHz
• Extends phone battery life (uses less power when signal is stronger)
• Protects the carrier network using patent-pending technologies

Set-Up is as easy as:

1. Put unit in window (or wherever you get signal)
2. Plug in power supply
3. Sync to your mobile network by pressing the SyncLink button and making a call

 Click to Enlarge

Setup overview:

The zBoost-ONETM cell phone signal booster extends a Cell Zone™ for 1 - 4 phones/devices on the same UMTS carrier network in homes or offices. zBoost-ONE will boost signal up to 1200 sq ft or up to 40 ft from the zBoost unit.

Package Contents

YX400-U

Power Supply

FIRST: Sync zBoost-ONE to your carrier network

NOTE: This step only needs to be performed once at the beginning of your set-up

1. Place the zBoost-ONE unit on a window sill or location of strongest signal.
2. Connect the zBoost unit to the provided power supply and plug into a power outlet.
3. The SyncLink Button will flash red.
4. Make a call with your device. If using a wireless data card, make a connection using the software on your computer.
5. Press the SyncLink Button. The SyncLink Button will blink green and the Handset Indicator will turn on.

NOTE: If this does not happen, then the sync has failed. Disconnect the power from the wall outlet and repeat steps.

SECOND: Find the best position for the zBoost-ONE

1. The Signal Strength Indicator reflects the signal level being received by the unit at the window. Adjust the angle or position of the zBoost-ONE unit until the strongest possible signal is received.
2. 3 or more lit bars will provide optimal performance (up to 40 ft from the zBoost unit).