zBOOST-ONE YX400-P FOR SPRINT AND METRO-PCS

Designed for consumers, the zBoost-ONE™ cell phone signal booster extends a Cell Zone™ for 1 – 4 phones/devices on the same PCS carrier (either Sprint or MetroPCS). The zBoost-ONE supports voice and data protocols at 1900MHz in their homes or offices, boosting signal up to 1200 sq. ft. or up to 40 feet from the unit. zBoost-One is the FIRST ONE PIECE cell phone signal booster that actually SYNCS to your carrier to reduce dropped calls and increase call clarity.

Benefits Include

• Increases indoor signal coverage – up to 1200 sq. ft. or 1 - 2 rooms
• No external antennas – ONE PIECE!
• Easy to set up – just put it where you get signal and plug it in
• Supports 1 to 4 users operating on the same carrier network
• Compatible with phones, Smartphone’s and data cards using Sprint or MetroPCS
• Extends phone battery life (uses less power when signal is stronger)
• Protects the carrier network using patent-pending technologies

Set-Up is as easy as:

1. Put unit in window (or wherever you get signal)
2. Plug in power supply
3. Sync to your carrier network by pressing the SyncLink button and making a call

 Click to Enlarge

Setup overview:

The package includes everything you need: base unit, base unit antenna, power supply, low-loss SATV coaxial cable (RG6), signal antenna and mounting hardware. The omni-directional signal antenna receives signals from multiple cell towers.

Package Contents

zBoost Unit

Power Supply

FIRST: Sync zBoost-ONE to your carrier network (either Sprint or MetroPCS)

NOTE: This step only needs to be performed once at the beginning of your set-up

1. Place the zBoost-ONE unit on a window sill or location of strongest signal.
2. Connect the zBoost unit to the provided power supply and plug into a power outlet.
3. The SyncLink Button will flash red.
4. Make a call with your device. If using a wireless data card, make a connection using the software on your computer.
5. Press the SyncLink Button.
6. The SyncLink Button will blink green and the Handset Indicator will turn on.

NOTE: If this does not happen, then the sync has failed. Disconnect the power from the wall outlet and repeat steps.

SECOND: Find the best position for the zBoost-ONE

1. The Signal Strength Indicator reflects the signal level being received by the unit at the window. Adjust the angle or position of the zBoost-ONE unit until the strongest possible signal is received.
2. 3 or more lit bars will provide optimal performance (up to 40 ft from the zBoost unit).